|
|
DVD Burner takes an hr to burn
Hey wat up everyone. I hope someone can help me out with my problem. Well i have a lite on burn model # SOHW-1693S. When i burn a dvd with a dvd-r 16x it takes an hr to burn. I tried the burner with another computer and it burned at the proper speed and only took 5 minutes to burn a dvd movie but on my computer it takes an hr for the same movie. I have tried everything from changing software burner moved memory chips around and nothing has worked. I used and am still using nero to burn dvd's. does anyone have a solution for my problem? I would appreciate your help.
Do you also have Roxio installed on the problematic computer? If so, uninstall it.
nah i only have nero installed and thats it
Hi!
1) Make certain that you have DMA turned on for your drives
2) See if there's an official firmware update available for your burner
3) Post a NERO log of one of your burns here
Another possibility, if you tried to burn at 16X, is that it tried to burn at that speed and couldn't so it stepped it all the way down to 1X. That's happened to me before. Since you're using both 16X drive and media, you should be safe to burn at 8X, but you should never exceed half the rated speed of the drive or media, whichever is faster.
What CWR03 says makes a lot of sense. I use a 1693S w/Nero 6 at 6x and it does a DVD5 in about 10 minutes.
Check which version of nero you have, if it came bundled with your burner then the Nero is the low end type of trial version which limits your buring speed.
here is my nero log. enjoy reading it lol:
4A23-70C1-M050-2243-1020-9507
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
Recorder: lt;LITE-ON DVDRW SOHW-1693Sgt;Version: KS0A - HA 1 TA 1 - 6.6.0.14Adapter driver: lt;atapigt; HA 1Drive buffer : 2048kBBus Type : default (0) -gt; ATAPI, detected: ATAPI
CD-ROM: lt;JLMS DVD-ROM XJ-HD166gt;Version: DD05 - HA 1 TA 0 - 6.6.0.14Adapter driver: lt;atapigt; HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160023AS iaStor Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS DVD-ROM XJ-HD166 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
JLMS DVD-ROM XJ-HD166 D: CDRom0
LITE-ON DVDRW SOHW-1693S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046620kB)
Free physical memory: 611MB (626412kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.12.2005
UDF/ISO compilation
11:28:22 AM#1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
11:28:22 AM#2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
11:28:22 AM#3 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:28:22 AM#4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
11:28:22 AM#5 Text 0 File Reader.cpp, Line 127
Reader running
11:28:22 AM#6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1693S running
11:28:22 AM#7 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)
11:28:22 AM#8 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)
11:28:22 AM#9 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media
11:28:22 AM#10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
11:28:22 AM#11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
11:28:22 AM#12 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-RDisc Manufacturer: CMC MA - G. AE1Disc Application Code: 64, Disc Physical Code: 193
11:28:22 AM#13 Text 0 File DlgWaitCD.cpp, Line 445
gt;gt;gt; Protocol of DlgWaitCD activities: lt;lt;lt;
=========================================
11:28:22 AM#14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -gt; TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------
11:28:22 AM#15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========MCN: quot;quot;TOCType: 0x00; Session Closed, disc fixatedTracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, Isrc quot;quot;
DAO layout:
===========__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x002286112 | lead-out | 1 | 0x41 | 0x00
11:28:23 AM#16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:28:23 AM#17 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.
11:28:23 AM#18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:28:23 AM#19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
11:28:23 AM#20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:28:23 AM#21 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode
11:28:23 AM#22 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -gt; ON , SMART-BURN : ON
11:28:23 AM#23 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes
11:28:23 AM#24 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050Book Type: DVD-R (2), Part Version: 5Disc Size: 120 mm, Maximum Rate: lt;not specifiedgt; (F h)Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordableLinear Density: 0,267 um/bit, Track Density: 0,74 um/trackStarting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)End Physical Sector Number of Data Area: 26127F hEnd Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 hMedia Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:29:05 AM#25 Text 0 File Cdrdrv.cpp, Line 1288
11:29:05.828 - LITE-ON DVDRW SOHW-1693S\H1 T1 : Queue again later
12:20:24 PM#26 Text 0 File WriterStatus.cpp, Line 116
lt;LITE-ON DVDRW SOHW-1693Sgt; start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
12:20:24 PM#27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:20:24 PM#28 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 2286111
12:20:50 PM#29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/10/2005 3:04:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
=== Scsi-Device-Map ===
DiskPeripheral : ST3160023AS iaStor Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS DVD-ROM XJ-HD166 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 1 DMA: Off
It appears that you need to enable dma for your burner. I believe this was already suggested. If you want help it would be a good idea to actually try the things which are suggested before coming back for more help.
ps. you should not include your serial number in the log
Agreed - I also notice that your selected burn speed is 8X. Is your media 16X?
I used and am still using nero to burn dvd's.
Based on the log claiming a successful burn at 8X (should be 7-8 minutes) while actually taking 52 minutes, I'd speculate that you're using a demo version of NERO that you've now been using for more than 30 days (Which reduces to 1X burning after 30 days)...
By all means, as I initially speculated, and your log confirms, turn on DMA for your burner...
hey thnx everyone my problem was fixed. i had to go into the bios because dell had turned it off from da start. thnx a lot fo all your help and support.
thnx a lot fo all your help and support.
Glad to hear that our suggestions helped you resolve your dilemma! |
|
Post at 2011-4-15 14:44
| This Author's Posts Only
